We are UFH Experts, your specialist for modern, energy-efficient heat pumps in Essex to reduce your carbon footprint and lower your energy bills. Whether you’re planning to switch to greener heating or upgrade an old system, we provide a comprehensive range of Essex heat pumps tailored to meet your needs.
Ready to work with the renewable heating system specialists? If so, contact us today!
Fill out this form to get your free quotation from our experts – enquire today to lock in your quote.
By choosing UFH Experts for your air, ground, or source heat pumps in Essex, you’re committing to a more sustainable future. With our state-of-the-art heat pumps, you can reduce your reliance on fossil fuels and benefit from government incentives and grants designed to make renewable energy more accessible.
Our skilled team provides a complete service, from consultation and design to installation and aftercare, ensuring your heating system runs smoothly for years to come. We offer:
If you’re ready to make the switch to renewable heating, UFH Experts is here to guide you every step of the way. From ground to air source heat pumps in Essex, we provide the expertise and products you need to make a smart, sustainable choice for your home or business. Contact us today for more information about our services!
Get in touch with our friendly, expert team today for FREE professional advice. We will discuss your requirements, your renewable heating needs and your goals in detail.
Our experienced engineers will design bespoke heat pumps in Essex tailored to your property. We offer fast, reliable installation with minimal disruption.
Once your heat pumps are installed, our expert team remains on hand to provide annual servicing, maintenance and expert support whenever required.
Take the first step toward a warmer, more energy-efficient space. Our team is here to guide you with the right solution tailored to your needs.
Heat pumps in Essex are renewable heating systems that use natural heat from the air or ground to provide heating and hot water for your property.
Yes, heat pumps are one of the most energy-efficient heating systems available, offering up to 4 units of heat for every 1 unit of electricity used.
Air source heat pumps extract heat from the outside air, while ground source heat pumps collect heat from underground pipes in the ground.
Yes. Heat pumps operate efficiently at lower temperatures, helping reduce heating costs compared to traditional systems.
The installation time for a heat pump can vary based on the size of the area and the complexity of the installation.
The cost of heat pump installation in Essex will vary depending on your requirements. Please contact us today for a tailored quote.
Dedicated designers & engineers, onsite management, and technical support.
2-year workmanship and 75-year pipe warranties.
Streamlined installation process with minimal disruption, delivered on time by experienced professionals.
Advanced system design to maximise heat output while reducing energy consumption and running costs.
Premium-grade materials and trusted components ensure long-lasting performance and system reliability.
We are always on hand to ensure that your system continues to perform at its best. We’re here to make sure your underfloor heating works flawlessly for years to come.
Get in Touch Today
Contact us today for FREE advice, expert guidance, and to discuss how we can help you install the perfect renewable heat pumps in Essex for your property and let us deliver the warmth you deserve.
This prestigious luxury residential project in Buntingford involved the complete design and installation of a high-performance underfloor heating system throughout an exceptional new-build home.
Working alongside R E Butler Construction, our team installed six manifolds strategically positioned across two floors to ensure precise zoning, maximum comfort, and efficient heat distribution throughout the property.
The ground floor, including the extensive pool surround area, utilised a traditional tacker pin system, with pipework securely fixed to insulation before the floor screed was applied. This method provided excellent thermal mass and consistent heat output across the large open-plan spaces and leisure areas.
On the first floor, we installed our premium 22mm routed chipboard overlay system, incorporating aluminium heat diffusion plates to deliver rapid response times and even heat transfer beneath the finished floor coverings. This approach allowed the benefits of underfloor heating to be achieved without the need for wet screed construction on the upper level.
The completed installation delivers discreet, energy-efficient comfort throughout the home, perfectly suited to modern luxury living while working seamlessly alongside the property’s heat source.
Project Highlights
UFH Experts were proud to deliver a 500m² commercial underfloor heating installation at Henry Moore Primary School, Kiln Lane, Harlow, providing an energy-efficient heating solution designed to meet the demands of a modern educational environment. Working in collaboration with SW HUNT, our experienced team installed a high-performance tacker pin system to ensure long-term comfort, reliability and efficiency throughout the school.
The project utilised our proven tacker pin underfloor heating system, with 20mm pipework securely clipped directly to high-performance thermal insulation. This method provides excellent pipe retention, precise pipe spacing and a robust installation capable of withstanding the rigours of commercial construction programmes.
The underfloor heating system was divided across four manifolds, allowing for effective zoning and balanced heat distribution throughout the building. Careful design and installation ensured that classrooms, teaching spaces and communal areas could benefit from consistent temperatures and improved occupant comfort, while maintaining the flexibility required within an educational setting.
Designed to operate in conjunction with a low-temperature air source heat pump, the system maximises the efficiency of the renewable heating technology. Underfloor heating is ideally suited to air source heat pumps, operating at lower flow temperatures than traditional radiator systems while delivering exceptional comfort and reduced running costs. This combination helps to lower energy consumption, reduce carbon emissions and support the school’s long-term sustainability objectives.
Working closely with SW HUNT and the wider project team, UFH Experts ensured the installation was completed to the highest standards of workmanship, delivered on programme and fully integrated with the building’s heating strategy.
This project demonstrates our expertise in providing commercial underfloor heating solutions for schools and public sector buildings, combining innovative heating technologies with practical, reliable installation methods.
Project Details
Project: Henry Moore Primary School
Location: Kiln Lane, Harlow, Essex
Sector: Education / Commercial
Underfloor Heating Area: 500m²
System: Tacker Pin Underfloor Heating System
Pipe Size: 20mm
Manifolds Installed: 4
Heat Source: Low-Temperature Air Source Heat Pump
Pipe Fixing Method: Clipped directly to thermal insulation using tacker pins
Delivered In Collaboration With: SW HUNT
At UFH Experts, we specialise in the design and installation of commercial underfloor heating systems across Essex and the South East, working alongside contractors, developers and M&E specialists to deliver efficient, sustainable heating solutions for schools, healthcare facilities, residential developments and commercial projects.
UFH Experts were proud to deliver a comprehensive 1,000m² underfloor heating installation within an exceptional luxury residence. Spanning from the basement through to the second floor, this prestigious project demonstrates our capability to design and install complex heating systems for some of the most demanding high-end residential developments.
The installation incorporated our tried-and-tested pipe-to-insulation system, with the underfloor heating pipework securely clipped directly onto high-performance thermal insulation before the application of screed. This method provides outstanding pipe stability, accurate pipe spacing and optimal heat output, creating a durable and highly efficient heating solution throughout the property.
Designed to serve more than 30 individual rooms, the system was divided across nine manifolds, allowing each area of the home to benefit from independent zoning and precise temperature control. From expansive open-plan entertaining spaces and leisure areas to bedrooms, bathrooms and ancillary accommodation, every zone was carefully considered to deliver the perfect balance of comfort, efficiency and responsiveness.
Traditional screed was incorporated as part of the floor build-up, providing excellent thermal mass and ensuring an even distribution of heat across the entire property. The result is a discreet heating system that eliminates the need for wall-mounted radiators, maximises usable living space and enhances the overall aesthetic of this remarkable home.
From initial preparation through to final installation, UFH Experts worked closely with the wider construction team to ensure the project was delivered to the highest standards of workmanship, quality and attention to detail.
This project highlights our expertise in delivering large-scale luxury underfloor heating installations, providing bespoke heating solutions for prestigious homes where performance, reliability and superior comfort are paramount.
Project Type: Luxury Private Residence
Property Size: 1,000m²
Floors Served: Basement to Second Floor
Underfloor Heating System: Pipe clipped directly to thermal insulation
Floor Build-Up: Traditional screed construction
Manifolds Installed: 9
Rooms Served: 30+ individually controlled zones
Sector: High-End Residential
At UFH Experts, we specialise in the design, supply and installation of premium underfloor heating systems across Essex and the South East, delivering bespoke solutions for luxury homes, developers and construction professionals seeking exceptional quality, efficiency and long-term performance.
UFH Experts were proud to deliver a large-scale luxury residential underfloor heating installation for an exceptional private home in Brentwood, Essex. Working in collaboration with Tom Green Construction and SW HUNT, this complex multi-storey project showcased our ability to provide fully integrated heating solutions tailored to the demands of high-end residential construction.
The installation comprised over 700m² of traditional sand and cement screed, incorporating comprehensive thermal insulation preparation to maximise the efficiency and performance of the heating system. Across the lower floors, we installed approximately 450m² of underfloor heating using our proven tacker pin system, with the pipework securely clipped directly to the insulation to provide a robust, accurate and efficient installation ready for screeding.
The property was heated via seven manifolds, carefully designed and zoned to ensure balanced heat distribution and individual control across the home’s multiple living areas. From expansive open-plan spaces to more private accommodation, the system was engineered to deliver exceptional comfort and long-term energy efficiency throughout all levels of the property.
A bespoke approach was adopted for the uppermost floor, where floor build-up constraints required an alternative solution. Here, our team installed the UFH Experts Wood 22 System, featuring 22mm routed timber panels with aluminium heat spreader plates and 16mm pipework. This specialist system provides outstanding heat transfer and rapid response times, making it ideal for timber floor constructions while maintaining the same levels of comfort expected throughout the rest of the home.
Close coordination with Tom Green Construction and SW HUNT ensured that every stage of the project, from insulation preparation and pipe installation through to screeding and final commissioning, was delivered to the highest standards of workmanship and within the construction programme.
This project demonstrates UFH Experts’ expertise in delivering high-end residential underfloor heating systems in Essex, combining traditional screeded solutions with innovative low-profile systems to meet the unique requirements of luxury homes.
Project Type: Luxury Private Residence
Location: Brentwood, Essex
System: Tacker Pin Underfloor Heating System & UFH Experts Wood 22 System
Underfloor Heating Installed: Over 700m²
Screeded Areas: 700m²+ Traditional Sand and Cement Screed
Tacker Pin Installation: Approximately 450m²
Manifolds: 7
Upper Floor System: Wood 22 Panels with Aluminium Heat Spreader Plates and 16mm Pipework
Thermal Insulation: Full insulation preparation undertaken
Sector: High-End Residential
Delivered In Collaboration With: Tom Green Construction & SW HUNT
At UFH Experts, we specialise in the design, supply and installation of bespoke underfloor heating systems throughout Essex and the South East, providing complete solutions for luxury homes, developers and construction professionals seeking exceptional quality, efficiency and performance.
UFH Experts were proud to deliver a 500m² underfloor heating installation within a prestigious private residence in Brentwood, Essex. Working in collaboration with Tom Green Construction and SW HUNT, our team installed a high-performance underfloor heating system designed to provide exceptional comfort, efficiency and reliability throughout the entire ground floor of this substantial family home.
The project utilised a tacker pin underfloor heating system, with the pipework securely clipped directly to high-performance thermal insulation to ensure a precise and robust installation. Spanning approximately 500m², the system was carefully designed and divided across five manifolds, allowing for effective zoning and balanced heat distribution to suit the varying requirements of each living space.
From expansive open-plan entertaining areas to more intimate rooms, the underfloor heating system provides discreet, energy-efficient warmth without compromising the interior design of the property. By eliminating the need for conventional radiators, the homeowners benefit from greater flexibility in room layouts while enjoying the superior comfort that underfloor heating delivers.
Working closely alongside Tom Green Construction and SW HUNT, UFH Experts coordinated seamlessly with the wider project team to ensure the installation was completed to the highest standards of workmanship, on programme and ready for the next stages of construction.
This project highlights our expertise in delivering luxury residential underfloor heating installations in Essex, supporting developers, contractors and homeowners with bespoke heating solutions tailored to the unique demands of high-end properties.
Project Type: Luxury Private Residence
Location: Brentwood, Essex
Area Installed: 500m² (Ground Floor Only)
System: Tacker Pin Underfloor Heating System
Pipe Fixing Method: Clipped directly to thermal insulation using tacker pins
Manifolds: 5
Sector: High-End Residential
Delivered In Collaboration With: Tom Green Construction & SW HUNT
At UFH Experts, we specialise in the design and installation of premium underfloor heating systems across Essex and the South East, delivering efficient, reliable and expertly installed solutions for both residential and commercial projects.
UFH Experts were delighted to deliver a 200m² commercial underfloor heating installation at the Elsenham Sports Pavilion, located within the Bloor Homes Eastern development in Elsenham, Essex. Working in collaboration with Essex Mechanical, our experienced installation team supplied and installed a high-performance tacker pin underfloor heating system, designed to provide reliable, energy-efficient heating throughout the new community facility.
The system was installed by securely clipping the underfloor heating pipework directly onto high-performance thermal insulation using a tacker pin fixing method. This approach allows for accurate pipe spacing, excellent pipe retention, and rapid installation, helping to ensure consistent heat distribution and optimal system performance.
As a modern sports pavilion serving the local community, comfort, durability, and efficiency were key project requirements. Our team worked closely with Essex Mechanical to deliver the project to the highest standards, ensuring the installation was completed professionally, on programme and ready for the next stages of construction.
This project showcases UFH Experts’ expertise in delivering commercial underfloor heating solutions across Essex, supporting main contractors, M&E contractors, and developers with dependable installations for schools, sports facilities, residential developments and public buildings.
Project: Elsenham Sports Pavilion
Location: Bloor Homes Eastern Site, Elsenham, Essex
System: Tacker Pin Underfloor Heating System
Area Installed: 200m²
Pipe Fixing Method: Clipped directly to thermal insulation using tacker pins
Sector: Commercial / Community Sports Facility
Delivered In Collaboration With: Essex Mechanical
Looking for an experienced commercial underfloor heating contractor? UFH Experts specialise in underfloor heating installations throughout Essex and the South East, providing tailored solutions for residential developments, commercial projects and public sector buildings.
The Wood 22 Underfloor Heating (UFH) System is expertly designed to enhance energy efficiency in timber floors by reducing the water temperature needed for heating. With heat being distributed above the 22mm load-bearing floor, Wood 22 helps you achieve significant energy savings, making it an ideal solution for homes with timber flooring.
Key Features of the Wood 22 System:
How It Works:
The Wood 22 system works by placing moisture-resistant 22mm V313 P5 chipboard boards either at a 90° angle to the joists or over an existing level deck. These boards are custom routed by our engineers to fit your space. Once the boards are in place, feed or supply pipes are either laid beneath the boards or routed directly into them. After creating any bespoke routes required, aluminium heat distribution plates and 16mm pipes are installed based on your custom layout.
By reducing the flow temperatures, the Wood 22 system ensures energy-efficient operation, particularly when paired with low-temperature heat sources like ASHPs and GSHPs. The result is even, cost-effective heating across your space, offering both comfort and savings.
With Wood 22, you’ll enjoy a reliable and energy-efficient heating solution that helps you maintain a comfortable temperature while keeping energy use low.
Our Tacker Pin Underfloor Heating (UFH) system is designed to provide a tailored thermal output, ensuring your space is heated exactly how you need it. By adjusting the spacing or frequency of the pipes, we can optimise heat distribution for maximum comfort. The system uses warm water UFH pipes securely attached to thermal insulation and embedded within concrete or screed, offering exceptional performance and efficiency.
Key Features of the Tacker Pin System:
How It Works:
The Tacker Pin system starts by placing thermal insulation on the subfloor to reduce heat loss. The warm water UFH pipes are then securely fastened to the insulation using tacker pins, keeping them in place as the screed is applied. After the custom pipe layout is installed, the system is filled with water and tested to ensure everything is working correctly. The screed layer is applied, and the system is thoroughly checked throughout the process for a flawless installation. Once the screed is dry, your floor is ready for the final covering, providing you with even, efficient warmth.
Our team of experts ensures every detail is taken care of, from pipe placement to system testing, delivering a smooth, reliable installation that creates a warm and comfortable environment.
Upgrade your existing floors with ease using our Retro Therma Milled Underfloor Heating System, designed specifically for retrofit projects. This innovative system eliminates the need for extensive construction, making it ideal for transforming your space without the hassle of major renovations.
The process involves milling precise grooves directly into your existing floor screed to accommodate UFH pipes, ensuring a seamless integration without compromising ceiling heights. Once the pipes are securely installed, the pipe is protected using a cementitious latex ready for your chosen finish, whether it’s timber, tiles, carpet, or any other covering.
Key Benefits of Retro Therma Milled UFH System:
Whether you’re looking to modernise your home or enhance an older building, our Retro Therma Milled Underfloor Heating System offers a hassle-free way to enjoy the comfort and efficiency of underfloor heating. Contact us today to learn more and explore how this system can work for your retrofit project.
The Double Joist Plate Underfloor Heating System is the perfect solution for spaces requiring both heating and soundproofing. Designed to minimise impact noise while delivering warmth, this system is ideal for multi-story buildings, apartments, and areas where sound insulation is a priority.
Key Features of the Double Joist Plate Underfloor Heating System:
How It Works:
Double Joist Plates are placed over the subfloor to create a stable base for the UFH pipes. These battens incorporate sound-insulating materials that effectively dampen impact noise. Once the pipes are installed and secured, the system is covered with a suitable flooring layer, combining soundproofing and efficient heating in a single solution.
The Double Joist Plate Underfloor Heating System provides the ultimate balance of warmth and noise reduction, making it a top choice for modern, multi-functional spaces.
Our Floating Floor Heating System is the perfect solution for concrete solid floor constructions, delivering quick, clean, and highly efficient heating. Made from a grooved insulation board, this system comes in various materials and thicknesses (minimum 20mm), offering flexibility to meet your specific needs.
Key Features of the Floating Floor System:
How It Works:
The Floating Floor Heating System is laid directly over the concrete subfloor, providing a stable base for the underfloor heating pipes. The grooved insulation board features pre-made channels to securely hold aluminium spreader plates and pipes, which are then connected to a warm water UFH system. The system is completed with your chosen floor finish, providing efficient, even heating without the need for drying time or complicated installations.
This versatile system combines fast installation, enhanced structural support, and highly effective heating performance.
Our Clip Rail Underfloor Heating (UFH) System is designed to bring customised thermal comfort to any space. By adjusting the pipe spacing or frequency, we ensure even heat distribution, delivering warmth where you need it most. Like our Tacker Pin UFH system, the Clip Rail System securely anchors warm water pipes to thermal insulation, embedding them in concrete or screed for optimal performance and efficiency.
Key Features of the Clip Rail System:
How It Works:
The Clip Rail System works by securely anchoring warm water pipes to thermal insulation using a clip rail. Once the pipes are fixed in place, they are embedded in a screed layer—either self-levelling liquid screed or semi-dry cementitious screed—ensuring efficient heat transfer and stability. Screed can be treated to speed up the drying process or reduce thickness, allowing light foot traffic within 24 hours.
Our team manages every step of the installation process, from laying insulation and securely fixing the pipework to screeding, ensuring perfect results and optimal comfort.
